Oppo Clone I8 Pro Lcd Fix Flash File U2 MT6580 Dead Recovery Fix Firmware HOT!
CLICK HERE >> https://blltly.com/2tvqtO
Oppo Clone I8 Pro Lcd Fix Flash File U2 MT6580 Dead Recovery Fix Firmware HOT!
How to Fix Your Oppo Clone i8 Pro LCD Screen with Flash File U2 MT6580 Firmware
If you have an Oppo Clone i8 Pro smartphone that has a broken LCD screen, or is stuck on the logo or boot loop, you may be able to fix it by flashing a new firmware. Flashing a firmware is a process of installing a new software on your device, which can solve various issues and improve its performance. However, flashing a firmware can also be risky, as it may erase your data or damage your device if done incorrectly. Therefore, you should always backup your data before flashing a firmware, and follow the instructions carefully.
In this article, we will show you how to flash the Oppo Clone i8 Pro LCD Fix Flash File U2 MT6580 Dead Recovery Fix Firmware, which is a custom firmware that can fix the LCD screen problem and restore your device to normal. This firmware is compatible with the Oppo Clone i8 Pro model that has the MT6580 chipset and runs on Android 6.0 Marshmallow. You can check your device model and chipset by going to Settings > About Phone.
To flash this firmware, you will need the following tools:
A Windows PC or laptop
A USB cable
The Oppo Clone i8 Pro LCD Fix Flash File U2 MT6580 Dead Recovery Fix Firmware, which you can download from here
The SP Flash Tool, which you can download from here
The MediaTek USB VCOM drivers, which you can download from here
Once you have downloaded all the files, follow these steps to flash the firmware:
Extract the firmware file to a folder on your PC.
Extract the SP Flash Tool file to another folder on your PC.
Install the MediaTek USB VCOM drivers on your PC.
Launch the SP Flash Tool as administrator.
Click on the Scatter-loading button and browse to the folder where you extracted the firmware file. Select the MT6580_Android_scatter.txt file and click Open.
Make sure all the boxes are checked and click on Download.
Turn off your Oppo Clone i8 Pro device and remove the battery if possible.
Connect your device to your PC via USB cable while holding the Volume Down button.
The SP Flash Tool will detect your device and start flashing the firmware.
Wait until you see a green tick mark and a Download OK message on the SP Flash Tool.
Disconnect your device from your PC and insert the battery if you removed it.
Turn on your device and wait for it to boot up.
Congratulations! You have successfully flashed the Oppo Clone i8 Pro LCD Fix Flash File U2 MT6580 Dead Recovery Fix Firmware on your device. You should now be able to enjoy a working LCD screen and a smooth performance. If you encounter any problems or have any questions, feel free to leave a comment below or contact us at support@needflashrom.com. aa16f39245